Polymer Trench Drains/Waste Water / Floor Drains / Utility Trenches/ Polycast Trench Drains

ROCKCRETE CONCRETE SPECIALISTS have been serving the commercial market since 2004. We currently serve 52 states, specializing in the construction of Commercial Trench Drains, Stainless Steel Trench Drains and Polymer Trench Drains, Concrete Footings, Floor Drains, Utility Trenches, Polycast Trench Drains and PITS. As a privately owned & operated business, we pride ourselves in effectively providing high quality service while continuing to be reasonably priced. All structures are ENGINEER-DESIGNED or CLIENT-SPECIFIC depending on the application. We are a medium-sized company that is very conscious of controlling our inventory and quality control, which in turn helps us provide a quality product at an affordable price. We typically make use of a 3500 PSI MINIMUM STRENGTH concrete and GRADE 60 STEEL REINFORCEMENT in order to provide a solid structure. All structures are done by a well-trained & focused crew in order to maintain quality at an affordable price.

Click Here for a FREE Estimate!!!

POTECT YOUR INVESTMENT WITH A SOLID FOUNDATION!

Are you buying new equipment or setting up a new facility?

Get a FREE ESTIMATE on the following services:

• INDUSTRIAL BASE PADS
• CUTTING, CORING AND DRILLING
• SURFACE WASTE WATER
• UTILITY TRENCHES
• FLOOR DRAINS
• FLOORS
• PITS

Click Here for a FREE Estimate!!!

WHY USE THE MAGAMAX FLOW SYSTEM?

All trenches are monolithically poured, creating a SEAMLESS SYSTEM including corners. The MEGAMAX FLOW SYSTEM allows sections to SLOPE FROM 5.25” TO UP TO 36” below floor level. Trenches are EASY TO CLEAN, since the formed RADIUS BOTTOM SURFACE of trenches creates BETTER RUN-OFF OF GREY WATER & DEPOSITS, and STEEL GRATES ARE EASY TO REMOVE (2 MIN / 100FT SECTION / PERSON). Once grates are removed there are NO OBSTRUCTING CROSS BARS in the way of your shovel / cleaning tool. All trenches have 6” MINIMUM WIDTH, with the option to upgrade up to 24”. The STEEL GRATES CAN BE EASILY REMOVED AND REUSED if you decide to relocate in the future. Trenches can be EASILY FILLED IN IF YOU RELOCATE, without having to remove any steel framework casted in place. TIE-INNS OR ADD-ONS to the existing trenches are easy, should you decide to expand you wet areas in the future. LAST MINUTE CHANGES ON SITE IS POSSIBLE, if you need to change your wet area perimeters.

Click Here for a FREE CONSULTATION !!!

WHY A CURVED-BOTTOM TRENCH?

The importance of a curved-bottom trench drain is primarily for maintenance. With a curved-bottom trench drain the sediment washes to the bottom of the curve, instead of spreading out along the entire flat bottom surface. If the trench drain was properly sized and sloped, the flow velocity in the bottom of a curved-bottom trench should reach 3-3.5 ft/sec. on a regular basis. When this happens, the sediment in the bottom of the trench becomes fluid and runs through the system keeping the trench drain clean and clear of debris. With a flat-bottom trench drain the flow is spread over a wider cross section, allowing the flow velocity to be less for the same volume of water. This causes the trench drain not reaching a scouring velocity as often and therefore allowing sediment to build up in the bottom of the trench drain.

10 YEAR WARRANTEE!